GLUE “VINAVIL SPECIAL” 250 G

Vinavil Special acetovinyl glue
Field of application
Vinavil Special is an adhesive suitable for wood, plastic laminates on wood, paper, cork, canvas and porous materials.

Instructions for use:

Clean the surfaces to be glued of dust or grease, spread a layer of adhesive of approx. 0.5 mm on one of the two parts to be glued (for difficult gluing on both parts). Application can be done by brush or with a notched trowel.
The adhesive can be diluted to the desired viscosity or used as is.
The approximate usage quantity is 100-150 g/m 2 , which can vary considerably depending on the porosity of the wood.
For a better hold, glueing should be subjected to a pressure of 2.5-5 kg/cm2 .
Joints covered with adhesive will temper and heat-seal at temperatures above +70-80°C.
Vinavil Special should be used at temperatures above +10°C.