“ZYROBOND” METACRYLATE ADHESIVE 2K-MMA 7306

Heat-resistant two-component structural adhesive system for bonding a wide variety of
of metals and precious metals, composites, glass, acrylics etc.
Areas of application:
Automotive, caravan and boat components, metalworking industry and mould construction,
machinery housing, furniture manufacture, plumbing systems, cabinets,
electronic and electrical components, displays and signs, etc.

Application examples:
► Bonding of flat iron, sheet metal and angles. ► Bonding presentation systems.
► Repairing enclosures, brackets, lamps and housings. ► Filling cracks and holes.
► Attaching handles, decorative elements or metal table legs to glass surfaces.
► Bonding stainless steel press fittings. ► Bonding hooks to ceramic surfaces.
Working time: <2 min ● Workable after: 1 hour ● Final hardening: 6 hours
Glue joint thickness: 0.2 – 2.0 mm ● Max. Elongation: 25% ● Temperature resistance: -40°C to +200°C

Instructions for use: The surface must be clean, dry and free of contaminants such as oil or grease. Surfaces that
are lightly sanded before gluing are particularly suitable for this product. Components A and B must be mixed
in equal proportions. The 2 components must be mixed thoroughly to ensure optimal adhesion. MMA 7295 can be
applied with a static mixer directly onto the surface to be bonded. To ensure that the mixing ratio is 100% accurate
it is useful to squeeze out and discard a small part of the adhesive. Excess adhesive can be removed with organic
solvents. The bonded joint should only be loaded after final polymerisation to ensure a complete bond.
Caution: mixing large volumes causes an exothermic reaction. Heat and smoke are created.